GMI D5030D Intrinsically Safe Isolator SIL 3 Switch/Proximity Detector Repeater, Relay Output

GET A QUOTE – For business orders requiring a written quote or for volume pricing please request a quote.

The dual channel Switch/Proximity Detector Repeater, D5030D module, is a unit suitable for applications requiring SIL 3 level (according to IEC 61508:2010 Ed. 2) in safety related systems for high-risk industries. The unit can be configured for switch or proximity detector (EN60947-5-6, NAMUR), NO or NC and for NE or ND SPST relay output contact. Each channel enables a Safe Area load to be controlled by a switch, or a proximity detector, located in Hazardous Area. Fault detection circuit (DIP switch configurable) is available for both proximity sensor and switch equipped with end of line resistors. In case of fault, when enabled it de-energizes the corresponding output relay and turns the fault LED on; when disabled the corresponding output relay repeats the input line open or closed status as configured.

D5030D is programmable via dip switches as single input and two independent outputs. Out 2 can be programmed for output duplicating Out 1 or Fault detection Out.

In case of duplication, relay actuation can be independently configured for each output. In case of fault output, relay actuation can be programmed as normally energized or normally de-energized.

Mounting on standard DIN-Rail, with or without Power Bus, in Safe Area / Non-Hazardous Location or in Zone 2 / Class I, Division 2 or Class I, Zone 2.

 

We are an authorized GMI distributor shipping to locations in North America.

$267.00

Product total
Options total
Grand total

Questions
or Volume Pricing?

Connect with Hazardous Area Expert:
281-978-2040 | Chat with Us
Get Quote

Description

  • Systematic capability SIL 3
  • 2 fully independent channels
  • Input from Zone 0 (Zone 20), installation in Zone 2
  • NO/NC switch/proximity Detector Input, NE/ND relay actuation mode
  • Field open and short circuit detection
  • Three port isolation, Input/Output/Supply
  • EMC Compatibility to EN61000-6-2, EN61000-6-4,EN61326-1, EN61326-3-1 for safety system
  • In-field programmability by DIP Switch
  • High Density, two channels per unit
  • Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without Power Bus
  • 250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier

Approvals

  • UL-Underwriters Laboratory
  • FM-Factory Mutual
  • ATEX
  • IECEx
  • TUV Certificate Summary

 

Resources

RELATED PRODUCTS

HAZARDOUS AREA INSTRUMENTS
BACKED WITH INDUSTRY LEADING SERVICE AND SUPPORT

Download Product and Service Catalogs

Fill out your contact details and we will forward you to download our product brochures. 

HAZARDOUS AREA INSTRUMENTS
BACKED WITH INDUSTRY LEADING SERVICE AND SUPPORT