FV-3532-4 | Hydrocarbon Leak Detection Camera

T-SERIES

FV-3532-4 | HYDROCARBON LEAK DETECTION CAMERA

The FV-3532-4 is IVC’s next generation hydrocarbon leak detection system. It can be a key component of an LDAR (Leak Detection and Repair) solution for manufacturers and distributors of liquid and gas hydrocarbon products. This rugged camera system is designed by Industrial Video & Control to detect fugitive hydrocarbon emissions.
A specialized thermal imaging sensor is optimized for persistent, 24-hour leak detection at locations used for the storage and distribution of hydrocarbon products. The fixed view thermal imager is precision-calibrated and programmed to sense the thermal signatures of hydrocarbon fluids and high-pressure gases. Up to four detection zones can be specified.

Key Features:

Thermal hydrocarbon leak detection
Immediate alarm notifications
640×480 thermal and optical imagers
Intrusion detection
Customizable detections zones
Easily integrates with SCADA systems

FV-3532-4 \| Hydrocarbon Leak Detection Camera
Specifications
THERMA IMAGER 640×480 VOx microbolometer
Spectral Range	8-14um	Pixel Pitch	17um
Thermal Sensitivity	NetD 40mK T/1 60Hz	Sample Rate	60 Hz NTSC
F-number	1.4	Detection Zones	4
Mask Zones	4	Focus	Fixed
OPTICAL IMAGER 1/3-inch DPS CMOS
Minimum Illumination	0.06 lux (B/W); 0.3 lux (color)	Resolution	768 (H) x 540 (V)
F-number	1.4	WDR	Built-in
White Balance	Auto	Focus	Fixed or vari-focal
GENERAL
Ethernet	100 Base-TX/10BaseT (RJ-45)	Compression	M-JPEG, H.264
Frame Rate	30 FPS	Voltage Required	High-Powered Power over Ethernet*
110 VAC
Power Consumption	40 W	Weight	15 lbs.
Operating Temperature	Gas	Dimensions	12.5″H x 9″W x 12.3″D
Mount	Wall Mount Arm Standard	Rating	NEMA4, IP66

The assembly includes a fixed optical camera that is used to mitigate false alarms and for visual verification.

When a leak is detected within a defined zone, a contact closure is activated to generate an alarm. IVC’s camera management software can be used to manage these alarms as well as communicate them to the site’s SCADA or DCS system using industrial protocols such as OPC or MODBUS TCP.

The FV-3532-4 is offered with a variety of lens options to suit most application needs. It is housed in a rugged, weatherproof enclosure. A camera mount provides for multi-axis adjustment.

FV-3532-4 Specifications

Datasheet

Get Help/Quote